BINDER

Test Kabini

Binder Environmental Test Chamber - KMF Series

KMF seri Environmental test chamber for constant climate The KMF is designed for absolutely reliable stability tests and precise maintenance of constant climatic conditions. Its advanced reserve capacity and extremely broad climatic range are designed to meet any future requirements. MKF series KMF 240   PERFORMANS ÖZELLIKLERI  Electronically controlled APT.line(tm) preheating chamber and refrigerating system assuring temperature accuracy and reproducible results Temperature range -10 °C - 100 °C (14 °F - 212 °F) Temperature range with humidity 10 - 90 °C (50 °F - 194 °F) Humidity range 10 % RH to 90 % RH MCS controller with 25 storable programs of 100 sections each for a maximum of 500 program segments Features: User friendly LCD screen Easy-to-read menu guide Integrated electronic chart recorder Variety of options for the graphic display of process parameters Real time clock Electronically controlled humidification and dehumidification system with capacitive humidity sensor Inner glass door Environmental friendly refrigerant R 134a Independent adjustable temperature safety device class 3.1, providing full protection against chamber over-temperature, with visual and audible temperature alarm Access port with silicone plug Ø 30 mm (1.18 inch), left side Complete safety connection kit for water supply and drainage, including water hose, total length 6 m (19.7 ft.) Ethernet interface for use with optional GMP/GLP and FDA guideline 21 CFR Part 11 compliant APT-COM(tm) DataControlSystem software 1 stainless steel rack included BINDER test certificate PDF Dosyasını İndir

Binder Environmental Test Chamber - MK Series

MK seri Environmental test chamber for complex temperature profiles This series covers the classic temperature range between -40 °C (-40 °F) and 180 °C (356 °F) for heat and refrigeration tests – with the added benefit of natural simulation by means of preheating chamber technology and the Horizontal Air Flow Design. Unique technology, developed by BINDER.With these features, the MK series thus meets the highest precision and performance requirements for cyclic temperature tests and presents an intelligent alternative to expensive individual solutions. MK series  MK 53 MK 240 MK 720  PERFORMANS ÖZELLIKLERI   Electronically controlled APT.line(tm) preheating chamber assuring temperature accuracy and reproducible results Temperature range -40 °C (-40 °F) up to 180 °C (356 °F) at ambient temperature 25 °C (77 °F) MCS controller with 25 storable programs of 100 sections each for a maximum of 500 program segments - User friendly LCD screen - Easy-to-read menu guide - Integrated electronic chart recorder - Variety of options for the graphic display of process parameters - Real time clock Programmable condensation protection for test material Powerful adjustable fan Access port, Ø 80 mm (3.1 inch), top Heated viewing window with interior lighting Environmental friendly refrigerant R 404a Temperature safety device class 2 (DIN 12880) with visual and audible temperature alarm Printer- and communication interface RS 422 interface for use with optional GMP/GLP and FDA guideline 21 CFR Part 11 compliant APT-COM(tm) DataControlSystem software 1 stainless steel shelf included BINDER test certi?cate PDF Dosyasını İndir

Binder Environmental Test Chamber - MKF Series

MKF seri Isi ve nem ayarli Test Kabinleri The MKF series is ideally suited for all tests in accordance with current temperature and climatic test standards based on DIN and IEC standards. The required temperature and humidity values can be attained rapidly and maintained accurately, even under extreme conditions. The unparalleled ease of operation as well as extensive standard features provide that ‘little extra’ in handling. MKF series  MKF 240 MKF 720   PERFORMANS ÖZELLIKLERI Electronically controlled APT.line(tm) preheating chamber assuring temperature accuracy and reproducible results Temperature range without humidity -40 °C to 180 °C (-40 °F to 356 °F), with humidity 10 °C to 95 °C (50 °F to 203 °F) Humidity range 10 % RH to 98 % RH MCS controller with 25 storable programs of 100 sections each for a maximum of 500 program segments User friendly LCD screen Easy-to-read menu guide Integrated electronic chart recorder Variety of options for the graphic display of process parameters Real time clock Electronically controlled humidification and dehumidification system with capacitive humidity sensor and pressurized steam humidification Integrated water storage tank Heated viewing window with interior illumination Programable condensation protection for test material Adjustable ramp functions via program editor Environmental friendly refrigerant R 404a 230 V power socket on the right-side operating panel Temperature safety device, Class 2 (DIN 12880) 4 potential-free relay outputs that can be activated via MCS controller Ethernet interface for use with optional GMP/GLP and FDA guideline 21 CFR Part 11 compliant APT-COM(tm) DataControlSystem software 1 access port Ø 50 mm (1.97 inch), left side 1 stainless steel rack included 4 castors (with 2 brakes) BINDER test certificate PDF Dosyasını İndir

Binder Environmental Test Chamber - MKT Series

MKT seri Environmental simulation chamber for complex temperature profiles in the low temperature range The MKT test chambers meet all requirements for testing under extreme temperature conditions between -70 °C (-94 °F) and 180 °C (356 °F). The outstanding heating and cooling speeds permit even faster temperature changes and more complex test cycles to be performed. MKF series  MKT 240  PERFORMANS ÖZELLIKLERI   Electronically controlled APT.line(tm) preheating chamber assuring temperature accuracy and reproducible results Temperature range from -70 °C to 180 °C (-94 °F to 356 °F) MCS controller with 25 storable programs of 100 sections each for a maximum of 500 program segments Features: User-friendly LCD display Integrated electronic line recorder Different diagram possibilities of process parameters Real time clock Heated viewing window with interior illumination Variable adjustable high-performance fan Programmable condensation protection for test material Adjustable ramp functions via program editor Environmental friendly refrigerants R 404a and R 23 Independent adjustable temperature safety device, Class 2 (DIN 12880) 230 V power socket on the right-side operating panel 4 potential-free relay outputs that can be activated via MCS controller Ethernet interface for use with optional GMP/GLP and FDA guideline 21 CFR Part 11 compliant APT-COM(tm) DataControlSystem software Access port, Ø 50 mm (2 inch), left side 1 stainless steel shelf included 4 castors (with 2 brakes) BINDER test certificate PDF Dosyasını İndir